Prelam Sheet Hole Puncher for 3x8 RFID Card Inlay Sheet Production
YHP-A
1. Introduction of Prelam Sheet Hole Puncher for 3x8 RFID Card Inlay Sheet Production
YHP-A
Contactless Card INLAY Sheet Hole Puncher YHP-A is designed to
punch chip fixing holes for installing built-in module in the
process of contactless card INLAY sheet production. The position of
chip fixing holes are adjustable in a certain range by adjusting
each punching mould positions. It has two sets of punching moulds,
one is for standard big chip (COB chips, MOA2, MOA4), and another
is for smaller chip (MOA8 chips).
This hole punching machine uses to punch of the positioning hole
and the clearance hole on PVC, PETG and ABS sheets with different
thickness and size for contactless cards (RF cards). Control by the
servo system and use the precision mold to punch, which ensure the
quality of the products and improve productivity, only need one
operator.
In the machine structure, the machine is easy to operate and
maintain, which enhances the service life of machine and
productivity.
2. Features of Prelam Sheet Hole Puncher for 3x8 RFID Card Inlay
Sheet Production YHP-A
As an indispensable machine of RFID card Inlay sheet production
line, it is also known or named as RFID Card INLAY Sheet Hole
Puncher, Automatic Prelam Sheet Hole Puncher or RFID Card Inlay
Sheet Chip Hole Die Cutter YHP-A.
| Dimensions | H1350*W700*L1550mm |
| G.W | 350kg |
| Power | AC220V 50/60HZ 1.5KW |
| Air pressure | 6kg/cm² |
| Air consumption | 50L/min |
| Control mode | servo positioning + PLC control |
| Accuracy | Servo division per step = 0.0125mm |
| Mechanical adjustment | 0.01mm |
| Operator | 1 |
| Output | 300-400 sheets per hour |
| Applicable layout | 3×8, 4×8, 5×5 |
| Applicable material (carrier) | Plastic materials like PVC, ABS and PETG |
| Number of die head: | 3, 4, 5 or 8 |
| Compressed air: | 5kg/cm2, 50L/min |
| cutting speed (max.) | 300-400 sheets per hour |
| Power supply | AC220V, 50/60HZ |
| Position precision | 0.1mm |
| Power | 1kW |
| Weight | around 350 kg |
| Dimension | L1350×W700×H1550 |
3. More details of Prelam Sheet Hole Puncher for 3x8 RFID Card
Inlay Sheet Production YHP-A
1. Punch the hole for the chip of the inlay, which ensures the
modules and the PVC embedding on the same plane and protects the
chips.
2. The machine has two molds with two different sides, it can be
used for different production technology, just press the switch to
select the mold.
3. The pitch and the size of the punching mold can be adjusted
according to the requirement.
4. The cylinder drives punching mold up and down with the low
noise.
5. PLC control and can be punched different layout,
6. Use the precision mold to punch and ensure the quality of the
products.
7. The life span of the mold is: It only needs to be whetted every
two million times punching
8. Punching with the low noise.
9. Materials are loaded using the dowel pin, easy to adjust.
10. Use the servo system to position which ensure the position
accurately
11. Use the PLC and the touch screen, stable and visualized.
12 .HMI system make communication easier.
