Smart Card Data Verification Machine YDV-7000
1. Introduction of Smart Card Data Verification Machine YDV-7000
Smart Card Data Verification Machine YDV-7000 is designed to
realize the function of data comparison and verification on RFID
card chip data, card surface data and magnetic stripe data of smart
card. It has three key functional units: RFID Card chip data
verification unit, OCR surface data verification unit and Magnetic
stripe data verification unit.
2. RFID Card chip data verification unit
- Frequency: 125KHZ&13.56MHz, 915MHz(optional)
- Communication protocol: ISO 15693,14443A/B ,ISO18000B/C
- It can realize the data reading and detection function for both
low-frequency and high-frequency chip cards.
- Ultra-high-frequency card data verification unit is optional.
- It can read the designated data and compare it with the database
files, and judge whether the data is wrong or not.
- Production log saving function is available.
- Data saving function in case of power failure is available.
3. OCR surface data verification unit
1)The unit can realize card surface data recognition through OCR
photography.
2) It can compare the identified surface data content with the
database file, and judge whether the data is wrong or not.
3) The analysis and recognition for duplicate data number and data
incompleteness is available.
4) It can recognize the following content: 1D barcode, 2D QR code,
Arabic number, English characters;
4. Magnetic stripe data verification unit
1) Magnetic reactance degree: 300 OE - 2750 OE;
2) Reading magnetic density: 210 DPI, 75DPI/210 DPI, compatible 210
DPI;
3) Magnetic stripe tracks: Track 1/2/3, HiCo/Loco, standard width
12.7mm.
4) It can read the magnetic stripe on both sides (upper side or
lower side of the processed card).
5) It can read the data in the magnetic stripe and compare it with
the database files.
5.Basic configuration
Card feeding magazine (CR80 standard card)→RFID card chip data
verification unit(LF+HF/optional UHF) →OCR surface data
verification unit →magnetic stripe data verification unit (
upper+lower side reading available)→Bad Card Rejection Unit →Good
Card Collection magazine
Smart Card Data Verification Machine YDV-7000 is also known or
named as Card Data Checking Machine, Card Data Proofreading
Machine, Smart Data Tester or Smart Card Quality Control Machine
YDV-7000.
6.Technical Parameter
Machine size | L1800*W600*H1600mm |
Power supply | AC220, 50/60 Hz |
Control mode | industrial control machine +PLC |
General power | 2.5KW |
Speed | 6000-7000 cards/hour |
Our service :
Pre-sale
(1) Professional suggestions (raw material matching, machine
selection, the condition of building factory, feasibility analysis
for brick machine production line)
(2) Device model choice (recommend the best machine according to
the raw material, capacity and the size of brick)
(3) Efficient on-line service
(4) Welcome to visit our factory and production line any time, if
you need, we can make invitation letter for you.
(5) Introduce the company file, product categories and production
process.
Sale:
(1) Update the production scheduling in time
(2) Quality supervision
(3) Product acceptance
(4) Shipping on time
After-sale:
(1) The engineer will guide to carry out the plant at the clients
side if needed.
(2) Set up, fix, and operate
(3) offer training to the operator until they are satisfied at
clients side.
(4) Skill support the whole using life.
(5) Recall clients regularly ,get feedback in time ,keep well
communication with each other
Guarantee
(1)We can supply one year guarantee period for our card machines,
if the client have any question ,they could contact our service
department any time ,we will supply efficient service .
(2)Within one year ,if the client meet the unsolvable questions ,we
can make site supporting.
