Automatic IC Card Milling Machine YIM-4000 milling the slot or
cavity for IC chip implanting on plastic card surface
1. Introduction of Automatic IC Card Milling Machine YIM-4000 milling the slot or
cavity for IC chip implanting on plastic card surface
Automatic IC Card Milling Machine YIM-4000+ is designed for milling
the slot or cavity for IC chip implanting on plastic card surface
in a precise and speedy way. It features robust design, reliable
performance and fully automatic operation. It is controlled by PLC,
which can well ensure easy parameter setting and stable
performance.
Automatic IC Card Milling Machine YIM-4000+
(IC card production machine, IC card slot milling machine, IC card
slotter, Card machine, smart card production machine)
2. Functional module configuration of Automatic IC Card Milling Machine YIM-4000 milling the slot or
cavity for IC chip implanting on plastic card surface
Functional module configuration:
Card feeding magazines (two) –slot milling station #1-slot milling
station #2-depth detection stations (two)(optional)-dust absorber
-Card Collection magazines (two)
- Double-card conveying system can ensure that two cards are milled
at the same time in a speedy way.
- Three-shaft positioning control system drives servo motor to mill
the slots of plastic cards.
- The parameters of each shaft can be adjusted respectively, and the
milling precision can’t be affected by the diameter tolerance of
the milling tool.
- If such problems as card overlapping, wrong card direction or wrong
milling depth (checked by the optional depth detection station),
the machine will automatically alarm and stop.
3. Technical Parameter of Automatic IC Card Milling Machine YIM-4000 milling the slot or
cavity for IC chip implanting on plastic card surface
| Power supply | AC 380V 50/60 HZ | Control method | PLC + Servo system |
| Total power | 6.0 KW | Card specification | ISO CR80/IEC7810 54x85.6mm |
| Air source | 6kg/cm² (dry) | Dimension | Approximately L1750xW800xH1850 mm |
| Air consumption | Approx. 50L/min | Milling precision | X/Y: ±0.015mm Z: ±0.010mm |
| weight | Approx 650Kg | Operator | 1 Person |
| Speed | 3500~4500pcs/h | | |
4. More details of ACF Process Dual-interface Bank Card Milling and
Embedding Machine Pre-personalized YIME-ACF-1
Product First Pass Rate
| ≥99.8% |
Equipment utilization rate
| ≥98% |
Mean Time Between Major Failures (MTBF)
| ≥168h |
| X Y. Z-axis accuracy of chip slot milling equipment | ±0.015mm；Cpk>1.33 |
| Embedding accuracy of chip embedding machine | ±0.02mm；Cpk>1.33 |
| Speed-UPH | 3500~4500pcs/h for 1-chip card production |
Our service :
Pre-sale
(1) Professional suggestions (raw material matching, machine
selection, the condition of building factory, feasibility analysis
for brick machine production line)
(2) Device model choice (recommend the best machine according to
the raw material, capacity and the size of brick)
(3) Efficient on-line service
(4) Welcome to visit our factory and production line any time, if
you need, we can make invitation letter for you.
(5) Introduce the company file, product categories and production
process.
Sale:
(1) Update the production scheduling in time
(2) Quality supervision
(3) Product acceptance
(4) Shipping on time
After-sale:
(1) The engineer will guide to carry out the plant at the clients
side if needed.
(2) Set up, fix, and operate
(3) offer training to the operator until they are satisfied at
clients side.
(4) Skill support the whole using life.
(5) Recall clients regularly ,get feedback in time ,keep well
communication with each other
Guarantee
(1)We can supply one year guarantee period for our card machines,
if the client have any question ,they could contact our service
department any time ,we will supply efficient service .
(2)Within one year ,if the client meet the unsolvable questions ,we
can make site supporting.
