Plastic Card Embosser YLE-2
1. Introduction of Plastic Card Embosser YLE-2
The Plastic Card Embosser YLE-2 is also named or known as Card
Embossing and Bronzing Machine, Card Embossing and Tipping Machine
or Card Numbering Machine YLE-2.
The model YLE-2 have two embossing stations with one tipping
station, which can emboss and tip the standard plastic card
simultaneously in a speedy way. It is one of our best sellers among
our products. This machine is designed only for embossing the
sequential number (3 fixed words or symbol+ maximum 16 numbers).
It applies the reliable Japanese servo motor as embossing power to
ensure better embossing effect with less maintenance operation.
- It applies Mitsubishi PLC, touch screen and step-motion system in
order to ensure the machine stability; the pneumatic parts applied
in this machine are made by SMC to their working durability.
The embossing moulds are made of Japanese special steel material
with the service life of tens of millions times. 2 sets of
characters in big and small size are available.
The embossed word or symbol can be custom-made as per customer
demand.
2. Technical Parameter of Plastic Card Embosser YLE-2
Speed | over 6000 cards/hr. |
Applicable material | 0.6-1.0 mm thick plastic CR80 cards |
Pressure of compressed air | 5 KG/cm2 |
Power supply | AC380V 50/60Hz |
Power | 3.5KW |
Weight | 600kg |
Dimension | L1700×W820×H1600 mm |
Our service :
Pre-sale
(1) Professional suggestions (raw material matching, machine
selection, the condition of building factory, feasibility analysis
for brick machine production line)
(2) Device model choice (recommend the best machine according to
the raw material, capacity and the size of brick)
(3) Efficient on-line service
(4) Welcome to visit our factory and production line any time, if
you need, we can make invitation letter for you.
(5) Introduce the company file, product categories and production
process.
Sale:
(1) Update the production scheduling in time
(2) Quality supervision
(3) Product acceptance
(4) Shipping on time
After-sale:
(1) The engineer will guide to carry out the plant at the clients
side if needed.
(2) Set up, fix, and operate
(3) offer training to the operator until they are satisfied at
clients side.
(4) Skill support the whole using life.
(5) Recall clients regularly ,get feedback in time ,keep well
communication with each other
Guarantee
(1) We can supply one year guarantee period for our card machines,
if the client have any question ,they could contact our service
department any time ,we will supply efficient service .
(2) Within one year ,if the client meet the unsolvable questions
,we can make site supporting.
